To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Installing a trailer connector can be daunting, but the custom-fit T-One connector makes it a breeze. Just plug it directly into your vehicle's existing wiring system without the need for cutting, splicing, or tapping. It's a straightforward, hassle-free process, even for those with minimal mechanical skills. You'll love how quickly and seamlessly it integrates with your vehicle, saving you time and effort.
When you need to power your trailer's signal lights, the 4-Pole Flat Trailer Connector has you covered. It's a universal solution compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately), ensuring versatility for various towing setups. Go from unboxing to fully operational with ease, getting you on the road faster with a reliable connection.
Electrical issues can ruin your towing experience, but the durable 16-gauge bonded wire construction provides robust performance that stands up to the elements. It’s designed to endure tough conditions, ensuring a consistent flow of power to your trailer's lights. Enjoy peace of mind knowing your wiring harness will hold up over time, maintaining excellent functionality.
Keep your trailer connector free of dirt and debris with the handy dust cap feature. It offers an extra layer of protection when your trailer connector isn't in use, extending the life of your connection by preventing corrosion. This thoughtful design detail ensures your setup is always in optimal condition.
Forget cumbersome installations with extensive tools. The no-drill installation process of this wiring harness means you simply have to locate your vehicle's connection points in the rear cargo area. It’s a process that takes minutes, allowing for a neat, clean setup that doesn’t compromise your vehicle’s integrity.
California residents: click here
good price and easy to install
Great fit and easy
Good service, good product.
I would order again. Prices were right and service was great.
Great product, service and easy to install. Will order from them again!
It took approximately 10 minutes to install. Would recommend to anyone.
1,2,3, very easy to install superb quality.
Plugged in just as it showed in the video.
Thanks
Harness connected right up to factory connectors in no time. A quaity product that keep your wiring looking and performing the way the factory designed it to.
Fit perfectly,fast shipping
The harness fit perfectly. It took me less than ten minutes to install. It's a quick and easy solution. Goodbye wire splicing!
it was easy to install havent tried it on the trailer
easy to install (once I removed the upper panel covers to expose the correct harness plugs...)
Also, dont forget to attach the ground
Works great!
the length of the wires from the 4 pin inline connector to the first spline it is a bit short, 6 more inches would be more "forgiving"; it is manageable.
Hi
Installed in minutes appears to be a nice addition to our business for hauling more merchandise. BUT the four smaller flat pieces of steel that hold the bolt head spin inside the 2010 Chevy Express frame and torqueing to speck was not achieved. I was able to wedge 3 of the four plates with bolt to stop it from spinning and torqued to spec but left one middle one un torqued. The light kit will have to be installed when the vehicle is empty to access the panels for removal.
Easy install, quick shipping, zero comp laints
Very easy to install on my 2018 Express 3500 Passenger. Follow this video: https://www.etrailer.com/tv-install-tekonsha-prodigy-p3-trailer-brake-controller-2017-chevrolet-express-van-90195.aspx
I ran the right side light in a channel over the door (see pic of me pointing to it). I used an old tension rod to punch through the gasket and pull the wires through the body... no cords dangling out of my door!
I also installed the Curt Heavy Duty hitch and the 7 wire RV harness (for vans without factory wiring)... all using the video above.
If you can't figure out the install on this, then you should'nt be driving. Easy, fast and worth the price. I paired this with the wiring kit for trailer brakes and 7-wire harness and I'm ready to tow. 2007 Chevrolet Express AWD passenger van.
Sal was great, got the order out same day FAST. Arrived right on time. The items were exactly what I needed to get my Van together for towing complete with hitch and wiring harness.
Great instructions. Took only 10 min to install. works great.
Both products were huge disappointment but this one was a total joke. The connectors do plug right in but the wires are too short to cleanly route or hide they have to be hanging in the air to reach - same behind the vehicle. This is worthless unless you just want the plugs, you will have to cut and buy a new flat to extend to your receiver unless you just want it all hanging from the plugs in the way of your cargo.
Excellent just as advertised received curt class lV and wiring # 118392 via UPS had it all installed in just over an hour
Fit perfect. East install. Pig tail was plenty long enough.
Easy to install great instructions
Purchased 2 kits for our work vans, we are a yr in and they both work flawlessly
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Stephan
6/3/2020
light kit went easy all is well thanks. One thing, keeper pin a little hard to access so far under the bumper but the hitch does its job.